Barco JAO18, User Manual, Page: 9 / 35

2. Installation
2. INSTALLATION
2.1 Power connection
Overview
1. Connect the supplied external DC power supply to the +19 VDC power input of your JAO15 / JAO18.
2. Plug the other end of the external DC power supply into a grounded power outlet by means of the proper
power cord delivered in the packaging.
3. Optionally, earth the terminal by connecting the functional earth blind fastener to a grounded outlet by
means of a wire with at minimum AWG18 size (according to national Regulation requirements regarding
maximum admitted cable length). Use an M3 screw to attach the wire to the functional earth blind
fastener.
Image 2-1
W
ARNING
:
When you unplug the power cable, always pull the plug, never pull the cable.
Although the JAO15 and JAO18 have a very low standby power consumption, unplug
the power cable to save energy if you do not use the terminal for a long period of time.
Connector type: 5.5 mm DC jack
2.2 SSD/HDD replacement
C
AUTION
:
Prior to removing any service door, make sure the unit’s power is off and
disconnected from the power sources to prevent electric shock or system damage.
To fully disengage the power to the unit, please disconnect the power cord from the AC
inlet.
To replace the SSD/HDD
1. Unscrew the Security Torx screws of the SSD/HDD service door, then remove the door.
K5903250 JAO15 / JAO18 10/03/2016 7