Barco JAO18, User Manual, Page: 7 / 35

1. Introduction
1. Microphone
Built-in digital microphone
2. SSD/HDD service door
Locked with Security Torx screws, used for SSD/HDD replacement.
3. JAOHandset side door (2x)
To be removed to install the JAOHandset (optional).
4. Speaker (2x)
Built in stereo speaker
5. Combined SCR and RFID reader
Combo Smart Carder Reader (SCR) + High-frequency (13.56MHz) RFID reader, with RFID contact-
less tapping and card parking support.
6. Bottom IO area
Image 1-3
- 2 x headset line out jack
- 2 x USB 2.0 connector (5V / 1.5A)
- HDMI input connector
7. Barcode scanner (optional on JAO18, not supported on JAO15)
8. Rear IO area
SC 19V
Image 1-4
- Functional earth blind fastener
- 19V DC power supply input connector
- 6P6C RJ11 service call (SC) connector
- 3 x USB 2.0 connector
- RJ45 LAN Gigabit Ethernet connector
9. RAM and miniPCIe service door
Locked with Security Torx screws, used for RAM replacement or installation of an extension module.
C
AUTION
:
The service doors may only be opened by quali fi ed service personnel, no
user serviceable parts inside.
W
ARNING
:
To prevent possible hearing damage, check the volume before using the
JAOHandset or headset line out and do not listen at high volume levels for long periods.
K5903250 JAO15 / JAO18 10/03/2016 5