Barco JAO18, User Manual, Page: 10 / 35

2. Installation
Image 2-2
2. Remove the current SSD/HDD and replace it with a new one.
Image 2-3
3. Put the SSD/HDD service door back in place and fi x it with the Security Torx screws.
2.3 RAM module replacement
C
AUTION
:
Prior to removing any service door, make sure the unit’s power is off and
disconnected from the power sources to prevent electric shock or system damage.
To fully disengage the power to the unit, please disconnect the power cord from the AC
inlet.
To replace the RAM module
1. Unscrew the Security Torx screws of the RAM service door, then remove the door.
Image 2-4
8 K5903250 JAO15 / JAO18 10/03/2016