26-0904001-00 Rev 00.00
7
Introduction
ImagePRO-II’s Dual Channel Output mode, available in the ImagePRO-II Dual Output unit,
allows for any selected input or Logo to be presented at two different output resolutions
simultaneously. For example, say your main presentation output is a projector running at
1920x1080p. With this mode enabled you could also send the output to a record deck
expecting NTSC. By assigning output connections to either Channel A or Channel B, the
channels can be independently configured for Output Resolution / Frame Rate, Area of
Interest, Effects or even Pan / Zoom settings, giving the operator maximum flexibility for a
given show configuration.
1.
Getting Started
To get started, make sure you have an ImagePRO-II Dual Output unit (R9004683) or obtain
a Dual Channel Option Card kit (R9004684) to upgrade an existing ImagePRO-II unit If you
are not certain what type of unit you have contact your local Barco Sales Representative for
more information.
Next, confirm that Software Release 2.00 or higher is installed to enable and make use of
the Dual Channel feature.
2.
Initial Setup
To enable Dual Channel Mode
1)
Press the SETUP button on the front panel.
2)
Select the SYSTEM menu.
3)
Scroll to SYSTEM MODE and change the field to DUAL2K.
4)
Wait for the system to configure itself to use this mode.
