85
R5914654 /04
G62 series
1
3
2
Image 6–7
Note:
This process may cause the other areas of the image to slide out of focus. This is totally
normal.
3.
If zone D is in focus on the screen, please check the focal plane of zone E.
•
If clear position is just on the screen→ No need to adjust.
•
If clear position is out of the screen(cloe to projector), rotate screw
②
CCW and then screw
①
&
③
CW
for half amount that
②
rotated. → repeat until both D and E are clear. (e.g. turning
②
CCW in a circle,
then turn
①
&
③
CW in half circle)
•
If clear position is in the screen(far from projector), rotate screw
②
CW and then screw
①
&
③
CCW for
half amount that
②
rotated. → repeat until both D and E are clear.
Summary of Contents for G62
