R5910888 /00
G60
37
Image 4-14
•
Focus
: Use up and down arrow keys to adjust the focus of the projected image.
•
Zoom
: Use up or down arrow keys to zoom in ir zoom out of the projected image.
•
Lens Shift
: Use arrow keys to adjust the lens position to shift the projected area.
•
Lens Memory
: Save or apply the current lens position. The projector can save up to five records.
•
Lens Lock
: Lock the lens to prevent the lens motors from moving.
•
Lens Calibration
: Calibrate the lens to return it to the center position.
High Altitude
When the projector is operated at the altitude over 5,000ft (1,500m), enable this funtion to have the projector
fans operating at high speed to ensure proper air circulation.
PIN
Set a PIN number to protect the projector.
•
PIN Protect
: Enable PIN Protect to protect the project. A PIN number is required once this function is
enabled. (Default: 12345)
•
Change PIN
: Change the PIN number.
Remote Settings
Set up the remote receiver to control the communication between the projector and the remote control.
•
Top
: Enable or disable the top remote receiver.
•
Front
: Enable or disable the front remote receiver.
•
HDBaseT
: Select On to set the HDBaseT terminal as the remote receiver.
•
Projector Address
: Set a specific number for the projector as its address. The projector will only
responds to the remote control set with the same address.
Show Messages
Turning on or off the on screen messages showing the projector status information, such as input source, IP
address, and gamma.
LED Settings
Configure the status LED indicators to help identify the projector status. The definitions of the status LED are
discussed in the chapter
“
, page 42.
•
Keypad LED
: Turn on or off the keypad backlight.
•
Status LED
: Turn on or off the status LED indicators, or select Warning/Errors Only to enable the
indicators for warning and error only.
Information
Display the projector information, such as model name, firmware version, and main input.