R5910888 /00
G60
39
L/R Reference
Select the reference for left and right (L/R) frames.
•
1ST Frame
: When the projector generates 3D sync signal internally, select this option to set the first frame
of the input source as the projector
’
s left reference. If the 3D image does not appear correctly, use 3D
Invert function to swap the left and right frames.
•
Field GPIO
: When the projector receives external 3D sync signal through a 3D sync in cable, select this
option to have the projector
’
s L/R reference synchronizing with the 3D sync signal from the 3D sync in
cable.
DLP Link
Enable or disable the DLP Link function according to how the 3D sync signal is processed.
•
On
: Turn on DLP Link when the 3D sync signal is generated by the DLP Link technology built-in the
projector. DLP Link works only with the glasses that are compatible with DLP 3D technology and the 3D
function is enabled.
•
Off
: Turn off DLP Link when the 3D sync out signal is sent to an emitter or another projector through the
3D sync out port.
4.8 Communications Menu
Overview
Image 4-16
LAN
Configure the LAN settings for network communications.
•
DHCP
: Turn on DHCP to automatically acquire IP address, subnet mask, gateway, and DNS. If it is turned
off, manually enter the values for the network.
•
IP Address
: Set the projector
’
s IP address.
•
Subnet Mask
: Set the projector
’
s subnet mask.
•
Default Gateway
: Set the projector
’
s gateway.
•
MAC Address
: Display the MAC address.
•
Apply
: Apply the network settings.