R5910888 /00
G60
44
Image is not an even rectangle
•
Perform keystone correction by pressing the
“
Keystone H
“
and
“
Keystone V
“
button on the remote control,
or using
“
Screen > Geometric Correction > V. Keystone or
“
H. Keystone
”
from the OSD menu.
Image is reversed
•
To reverse the image, enable rear projection by selecting
“
Screen > Rear Projection > On
”
from the OSD
menu.
The projector stops responding to all controls
•
If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before
reconnecting power.
If the remote control does not work
•
Check if the operating angle of the remote control is pointed within ±30° (front and back) to the remote
receivers on the projector. Make sure there are any obstructions between the remote control and the
projector.
•
Check the remote batteries. Make sure batteries are inserted correctly. Replace the batteries if they are
used up.
•
Ensure you have set the correct IR code to the remote control. See
“
Remote Settings
“
in the chapter
”
, page 36.
