Barco FL35, Command Reference Manual

Page: 15 / 24

RTCH Real Time Clock Hour GP3, GP4 Get, Set End User
RTCM
Real Time Clock Minute GP3, GP4
Get, Set
End User
RTCS Real Time Clock Second GP3, GP4 Get, Set End User
RTCD
Real Time Clock Day GP3, GP4
Get, Set
End User
RTCN Real Time Clock Month GP3, GP4 Get, Set End User
RTCY
Real Time Clock Year GP3, GP4
Get, Set
End User
RTCW Real Time Clock Day of Week GP3, GP4 Get End User
UMST
Store profile GP3, GP4
Set
End User Profile number (0 - 9)
UMRC Recall profile GP3, GP5 Set End User Profile number (0 - 9)
TDSM
Stereo Mode GP3 120Hz, GP4
Get, Set
End User See value table TDSM
TDGT Glass type GP3 120Hz, GP4 Get, Set End User 0 - DLP Link™, 1 - IR, 2 - IR
high brightness
TDGD Genlock phase delay GP3 120Hz, GP4 Get, Set End User
TDSE
Swap eyes GP3 120Hz, GP4
Get, Set
End User 0 - off, 1 - on
AUXL Full spectrum mode enable GP3 LED IR Get, Set End User 0 - disable, 1 - enable
DISL
RGB LEDs enable GP3 LED IR
Get, Set
End User 0 - disable, 1 - enable
LDMM LED Dim Mode GP3 LED IR Get, Set End User 0 - standard, 1 - custom
LPW1
LED Power GP3
Get, Set
End User
LDCR LED Dim Custom Red GP3 LED IR Get, Set End User
LDCG
LED Dim Custom Green GP3 LED IR
Get, Set
End User
LDCB LED Dim Custom Blue GP3 LED IR Get, Set End User
IBCO
Individual brightness and contrast
offset adjustments GP3, GP4
Get, Set
End User 0 - disable, 1 - enable 0-RGB, 1-IR
(if available)
BOR0 Brightness offset red GP3 LED IR Get, Set End User
BOG0
Brightness offset green GP3 LED IR
Get, Set
End User
BOB0 Brightness offset blue GP3 LED IR Get, Set End User
COR0
Contrast offset red GP3 LED IR
Get, Set
End User
COG0 Contrast offset green GP3 LED IR Get, Set End User
COB0
Contrast offset blue GP3 LED IR
Get, Set
End User
IR control->RGB adjustments
IR control
Stereo
Profiles
Settings->Set date and time
3. ASCII Command Sets
601-0381-00_GP3/GP4
Sicilium_1_24
12