Barco FL35, Command Reference Manual

Page: 17 / 24

MENU Menu Navigate Toggle OSD
Menu GP3, GP4 Set End User
NVUP
Menu Navigate Up GP3, GP4
Set
End User
NVDW Menu Navigate Down GP3, GP4 Set End User
NVLF
Menu Navigate Left GP3, GP4
Set
End User
NVRH Menu Navigate Right GP3, GP4 Set End User
NVOK
Menu Navigate Ok GP3, GP4
Set
End User
ECHO Communication Response
(on/off) GP3, GP4 Set End User
LANG
Language GP3, GP4
Get, Set
End User
SINF Show OSD Info GP3, GP4 Set End User
CWI1
Color Wheel Index 1 GP3
Get, Set
Power User
CWI2 Color Wheel Index 2 GP3 Get, Set Power User
CRST Reset All Counters GP3, GP4 Set Manufacturing
MAYR
Manufacture Year GP3, GP4
Get
Manufacturing
MAWE Manufacture Week GP3, GP4 Get Manufacturing
LFMP
LFM Performed GP3, GP4
Set
Power User
GPEN Enable Power User Gammas GP3, GP4 Get, Set Power User
AFCL
AD Factory Calibrate GP3, GP4
Set
Manufacturing
LSDI Lens shift disable GP3, GP4 Get, Set Power User 0 - enable 1 - disable
BCPE
Enable Power User brilliant color
modes GP3
Get, Set
Power User 0 - enable 1 - disable
STRS Skip reset timeout (mirror
exercise) GP3 Get, Set Manufacturing 0 - do not skip 1 - skip
(WQXGA only)
CALM
LED Calibration mode GP3 LED
Get, Set
Power User 0 - disable, 1 - enable
LVCA LED voltage calibration start GP3 LED Set Service Partner
LVCS
LED voltage calibration status GP3 LED
Get
Service Partner 0 - done, 1 - in progress, 2 -
failed
LVCE LED voltage calibration error
code GP3 LED Get Service Partner bit wise error code see value
table LVCE
LIVR
LED input voltage red GP3 LED
Get
Service Partner
LIVG LED input voltage green GP3 LED Get Service Partner
LIVB
LED input voltage blue GP3 LED
Get
Service Partner
LDVR LED drop out voltage red GP3 LED Get Service Partner
LDVG
LED drop out voltage green GP3 LED
Get
Service Partner
LDVB LED drop out voltage blue GP3 LED Get Service Partner
UINV Update internal sensor values
factory GP3 LED Set Manufacturing
UIVU
Update internal sensor values
user GP3 LED
Set
Power User
INCS Internal sensor calibration status GP3 LED Get Power User 0 - done, 1 - in progress, 2 -
failed
INCE
Internal sensor calibration error
code GP3 LED
Get
Power User bit wise error code see value
table INCE
INTR Internal sensor value red GP3 LED Get Power User
INTG
Internal sensor value green GP3 LED
Get
Power User
INTB Internal sensor value blue GP3 LED Get Power User
INDR
Internal sensor duration value red GP3 LED
Get
Power User
Menu navigate
Miscellaneous
Service->LED calibration
Service
3. ASCII Command Sets
601-0381-00_GP3/GP4
Sicilium_1_24
14