![background image](http://html1.mh-extra.com/html/barco/f90-w13/f90-w13_user-manual_4126017042.webp)
5. Getting started
5.1.3.2
LAN/Ethernet
Speci
fi
cations
Parameter
Value
Ethernet connector
1 RJ45 Connector for projector control (not content)
Protocols
DHCP, TCP/IP, UDP/P
Speed
10/100 Mbit/1000Mbit
5.1.3.3
USB-A port
Speci
fi
cations
Parameter
Value
USB connector
Type A
Function
Firmware upgrade using USB sticks
Power
Power 5V, max 1,5A (out)
Standard
USB 2.0
5.2
Power up the projector
C
AUTION
:
Sources should always be connected before the projector is powered up
C
AUTION
:
Use only power cords following the unit, designed for your projector model. Do not use unautho-
rized replacements. Do not use power cords which are damaged.
Power up the projector using the keypad or remote
1. Connect the line cord to the projector.
2. Plug the 3–pronged cord into a grounded AC outlet.
The projector will begin warming up.
3. Press the power button on the keypad or remote to bring the projector up to standby mode.
The power button backlight on the keypad will
fl
ash blue while the projector is warming up.
4. When the power button backlight is steady blue, the projector is ready for use.
5.3
Power down the projector
Power down using the keypad or remote
1. Depress and hold the power button on the keypad or remote for three (3) seconds.
2. When the projector panel is no longer illuminated, remove the mains power cord from the projector.
5.4
Power modes
General
The table below details the F90 power modes.
Mode
Description
Normal
Projector is booted up and the light source is on
38
601–0400–00 F90–W13 18/08/2016
Summary of Contents for F90-W13
