Barco F90-W13, User Manual, Page: 19 / 57

2. Getting to know the projector
2.5 Local keypad
About
1 2 3 4
9 8
5
7
6
10
Image 2-3
Item
No. Name Description
2 Navigation keys Navigation arrows (up, down, left, right), con fi rm selection ( )
3 OSD Display Turn the On Screen Display (OSD) menu ON or OFF.
4 Standby Power on / standby
5 Back Undo action / back to previous screen.
6 OSD ON/OFF Deactivate the On Screen Display (OSD). Only critical warnings will be displayed.
7 Input Activates input source menu on OSD or in LCD
8 Shutter Open or close lens shutter
9 Test Patterns Activates test pattern menu on OSD or in LCD
10 Lens Activates test pattern menu on OSD or in LCD
2.6 Wireless remote control
General
The projector remote control is a full feature wireless remote control, powered by two (2) standard AA batteries. The battery com-
partment is on the back side of the remote control.
The remote control is backlit for use in dark environments. It also has a data-jack that allows for wired connection to the projector.
When the wire is connected, the IR beam and internal batteries are switched off.
The projector has 2 IR receivers, one at the front and one at the top rear, which are used to receive signals from the wireless remote
control.
Source/input compatibility is dependant on projector con fi guration. The OSD will display “Not available” when
an unsupported source or input is selected.
601–0400–00 F90–W13 18/08/2016 15