Barco F90-W13, User Manual, Page: 36 / 57

4. Physical installation
Throw distance, FLD+ WUXGA
Projection distance
Image width
m
12.00
11.00
10.00
9.00
8.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
Screen diagonal
0.00
1.00
2.00
3.00
4.00
5.00
6.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
0.00
0.50
1.00
1.50
2.00
2.50
3.00
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
3.50
FLD+ L
ens 0.75 : 1 (
WUX
GA
) (EN42) (0.7 - 7m)
FLD+ L
ens 0.75 - 1.13 : 1 (
WUX
GA
) (EN45) (5 - 30m)
FLD+ L
ens 1.58 - 2.33 : 1 (
WUX
GA) (EN41) (1.5 - 15m)
FLD+ L
ens 2.33 - 4.3 : 1 (
WUXGA
) (EN44) (2.5 - 25 m)
FLD+ L
ens 1.12 - 1.58 : 1 (
WUX
GA
) (EN43) (1.5 - 15m)
FLD+ L
ens 0.65 : 1 (
WUX
GA
) (EN47) (0.5 - 4m)
FLD+ L
ens 0.75 - 1.13 : 1
(WUX
GA
) (EN46) (0.7 - 7m)
Image 4-7
4.7 Scheimp fl ug (Boresight) adjustment
What is Scheimp fl ug?
The lens holder has to be adjusted so that the “sharp focus plane” of the projected image falls together with the plane of the screen
(Fp1
→ Fp2). This is achieved by changing the distance between the DMD plane and the lens plane (Lp1
→ Lp2). The closer the lens
plane comes to the DMD plane the further the sharp focus plane will be. It can occur that you won’t be able to get a complete focused
image on the screen due to a tilt (or swing) of the lens plane with respect to the DMD plane. This is also known as Scheimp
fl ug’s
law. To solve this the lens plane must be placed parallel with the DMD plane. This can be achieved by turning the lens holder to
remove the tilt (or swing) between lens plane and DMD plane (Lp3
→ Lp4).
SC
R
E
EN
DMD
Lp1
Lp2 Fp1
Fp2
SC
R
E
EN
DMD
Lp3
Lp4 Fp3
Fp4
(Scheimpflug)
Image 4-8
Scheimp
fl ug principle
32 601–0400–00 F90–W13 18/08/2016