Barco F80-4K7, User Manual

Page: 24 / 86

3. Input & Communication
Parameter Value
Connectors 1x) BNC 75 ohm type IEC 60169-8, Amendment 2 1997, A
Bandwidth
>3 GHz
Return loss >10dB at 3GHz
Impedance 75 ohm resistive
3.4.5 HDBase T
Speci fi cations
Parameter Value
Reference speci fi cation HDBaseT 1.0 Speci fi cation, June 2010
Connector Standard RJ-45, 8P8C
Signal characteristics HDBaseT
Max. cable length (1080p/48b/60Hz) 100 m (Cat5e/6), Pixel Clock <=225HHz, Video Datarate
<=5.3Gbps
70 m (Cat5e/6), Pixel Clock >225HHz, Video Datarate
>5.3Gbps
100 m (Cat6a/7), Pixel Clock >225HHz, Video Datarate
>5.3Gbps
Max TMDS Clock Frequency 270 MHz
Max video resolution supported 1920x1200 @60Hz (WUXGA 60Hz)
HDCP Pass-Through Yes, from Source to Projector
IR Extension Not Supported
RS-232 Extension Not Supported
10/100Mbps Ethernet Pass-Through Not Supported
Fallback to 100BaseTx, IEEE 802.3u Not Supported
USB Over Centre Tap Not Supported
Power Over Ethernet Not Supported
Audio Not Supported
LEDs - HD Base Status Operation: Green, Left
Link/Mode: Yellow, Right
3.5 Control interfaces
About
The following control interfaces are available on the projector:
• 1x RS-232 (for projector control)
• 1x LAN/Ethernet (for projector control
• 3x USB-A ports
Overview
• RS-232
• LAN/Ethernet
• USB-A port
3.5.1 RS-232
Speci fi cations
Parameter Value
RS-232 connector 1 female DB9 connector (RS232-in) for projector control and
debug
20 R5906852 F80 SERIES 21/09/2017