Barco F80-4K7, User Manual

Page: 12 / 86

1. Safety
Label image Label description Label location
本投影机安装透射比大于 3.5 的可
换镜头
后，可成
为
RG3 ，操作前，
请
参考手册中
镜头
清
单
和
危
险
距离。本投影机与
镜头组
合
仅
供
专业
使用，非普通消
费
者使用。
For F80-Ultra, F80-4K9, F80-Q9 :
837 837
3
For North America: THIS PRODUCT IS IN CONFORMITY WITH PERFORMANCE
STANDARDS FOR LASER PRODUCTS UNDER 21 CFR 1040, EXCEPT WITH RESPECT
TO THOSE CHARACTERISTICS AUTHORIZED BY VARIANCE NUMBER 2017-V-4837
EFFECTIVE September 13, 2017.
This projector may become RG3 when an interchangeable lens with throw ratio greater than
2.8 is installed. Refer to the manual for the lens list and hazard distance before operation.
Such combinations of projector and lens are intended for professional use only, and are not
intended for consumer use.
Ce projecteur peut devenir un projecteur RG3 en cas d’installation d’un objectif
interchangeable dont le rapport de projection est supérieur à 2.8. Veuillez vous reporter
au manuel pour en savoir plus sur la liste des objectifs et la distance de sécurité avant
toute utilisation. De telles combinaisons entre projecteur et objectif sont conçues pour des
applications professionnelles uniquement et pas pour des applications grand public.
本投影机安装透射比大于
2.8
的可
换镜头
后，可成
为
RG3
，操作前，
请
参考手册中
镜头
清
单
和
危
险
距离。本投影机与
镜头组
合
仅
供
专业
使用，非普通消
费
者使用。
1.4 Risk Group 3 Safety
1.4.1 General considerations
Notice on optical radiation from F80 Projector when it becomes Risk Group 3.
• For RG3, no direct exposure to the beam shall be permitted.
For RG3, operators shall control access to the beam within the hazard distance or install the product at a height that will prevent
eye exposure within the hazard distance.
• This projector has one or several built-in Class 4 laser clusters. Disassembly or modi fi cation is very dangerous and should
never be attempted.
• Any operation or adjustment not speci fi cally instructed by the user’s guide creates the risk of hazardous laser radiation expo-
sure.
• Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
FOR PROFESSIONAL USE ONLY means installation can only be carried out by Barco AUTHORIZED PERSONNEL familiar with
potential hazards associated with high intensity light beams.
W
ARNING
:
No direct exposure to the beam within the hazard distance shall be permitted, RG3 (Risk Group
3) IEC 62471-5:2015
C
AUTION
:
Use of controls or adjustments or performance of procedures other than those speci fi ed herein
may result in hazardous radiation exposure.
1.4.2 High Brightness precautions: Hazard Distance (HD)
HD
Hazard Distance (HD) is the distance measured from the projection lens at which the intensity or the energy per surface
unit becomes lower than the applicable exposure limit on the cornea or on the skin. The light beam is considered (to
be) unsafe for exposure if the distance from a person to the light source is less than the HD.
8 R5906852 F80 SERIES 21/09/2017