34
CT series User Manual - Overview
english
5.6.1 Picture > RealColor sub menu
BrilliantColor™
:
Texas Instruments DLP™ color processing. 3 settings*:
Bright:
Max brightness, boosted color profile for highest perceived brightness. In this mode
all segments and spokes of the color wheel are in use.
Color:
Max brightness, balanced color profile for better color performance. In this mode all
segments and spokes of the color wheel are in use.
Auto: Only available in 3D
Off:
In this mode the spokes (transition between segments) and all secondary segments
(cyan and white) and on color wheel are off. Less color and brightness boost will reduce
image noise.
SRP™ Half:
Smear Reduction Processing (half revolution), wiz zim/wiz zim bright only
SRP™ Full™:
Smear Reduction Processing (full revolution), wiz zim/wiz zim bright only
color correction:
Enable or disable color correction.
desired values:
Desired coords mode (RGB, RGBCMY) for RealColor and specification of red, green blue,
cyan, magenta, yellow and white (if in coordinates mode) coordinates (x,y) color and gain.
Reset all to native:
Resets all to measured values/projector native)
white
Decides which method to be used for setting of the white point; temperature of x-/y-
coordinate.
temperature:
Sets the system color temperature (white point) on the Kelvin scale from 3200K to 9300K
in steps of 100K. All color temperatures are tracked on the black body curve. The exact
coordinates for the temperature will be shown in coordinates (x,y) when adjusting the
temperature.
x-coordinate:
Sets the X co-ordinate of the white point.
y-coordinate:
Sets the Y co-ordinate of the white point.
reset to D65:
Reset the white point to D65 coordinates.
reset to native:
Resets white point to measured values.
RealColor calibration:
Selects color calibration test images (off, uncorrected red/green/blue/full white) and color
processed test images (red, green, blue, white, black, cyan, magenta, yellow). Presents
measured values for RealColor (see below). Calibration settings have to be made individually
for each separate profile.
5.6.2 Picture > Advanced sub menu
horizontal position
:
Shifts the image sideways (VGA only)
vertical position:
Shifts the image up or down (VGA only)
phase
:
Adjust for stable image. A jittery image may appear with certain VGA sources.
You may also press the AUTO button on the keypad or remote control
to optimize.
frequency:
Adjust image width. An incorrect setting may produce vertical, unstable bands
in the image, and parts of the image may not be displayed on screen. Push the
AUTO button to find a correct setting, or manually adjust the frequency until the
vertical bands disappear. Frequency adjusts the pixel clock sampling frequency
color space:
Enables selecting between Auto, RGB, YCbCr 601, YCbCr 709
input level:
Choice between; auto, computer, video. Depending on source select between
0-255 (computer), 16-235 (video).
source correction:
Gives access to individual brightness offset settings (see below).
In addition you can start the AD calibration process which requires VGA source
which displays a Grey16 image (right hand image below).
*
In advanced profile additional BC modes:
- Color (rgb only), bright (rgb only),
- SRP Half (rgb only), SRP Full (rgb only)
Summary of Contents for CTHD-61B
