Barco CTHD-61B, User Manual

Page: 17 / 68

english
17
4.3 Ceiling and rig mounting
Use the three mounting holes provided in the bottom part to securely fix the projector to a
ceiling or rig mount.
Use M6 screws that protrude maximum 9mm into the projector body.
Figure 4-2. Ceiling/rig mounting mounting holes
4.4 Locking the projector
The projector can be locked physically by using a so called Kensington lock.
The Kensington lock hole, where the lock itself is attached, can be found on the back of the
projector. Use an approved locking cable to secure the projector to a solid object.
4.5 Projector angle (tilt)
The projector should be tilted m/- 20 degrees from level (flat/ceiling) position.
It can be rotated 360 degrees around the lens axis.
Tilting at higher degrees may reduce lamp life and increase the probability of overheat-
ing the projector. Installation outside these specifications can void the guarantee.
Figure 4-3. Tilting angles
-20
o
+20
o
360 o