![background image](http://html1.mh-extra.com/html/barco/coronis-fusion/coronis-fusion_getting-started-manual_3890436043.webp)
Troubleshooting
43
eliminates the danger that colors will change when focus moves
among different applications.
However, if you are using the
Color to Gray Compatibility
palette
mode, the color setting for your high-resolution grayscale displays
should default to True Color (32 bits per pixel). Even though this
palette mode supports 32 bit True Color, Barco recommends that
when using a using a color display in conjunction with your high-
resolution grayscale display(s) that you still set the
color display
as
the
primary
monitor of the Windows desktop.
Setting the resolution of your B
ARCO
C
ORONIS
F
USION
Display
Note:
In order to set the resolution of your B
ARCO
C
ORONIS
F
USION
Display you must be logged in using an account with
administrator privileges.
1.
Open the “
Windows Display Control Panel
” by one of the two
methods below:
a)
Start > Settings > Control Panel > Display
or
b)
Open the
“Display Properties Control Panel”
by right
clicking in an empty area on the desktop, then select
Properties
.
2.
Click on the
Settings
tab.
3.
Select the
rectangle
that represents the Barco Coronis display
whose settings you wish to change.
Note:
If you are using the VGA capabilities of your Coronis
display controller, the resolution for the first display may be set
to a VGA resolution of
“640 x 480”
pixels with 16 colors and a
default refresh rate. If your Coronis controller is not running VGA,
the display may not be enabled yet. To enable the display, check
the
“Extend my Windows desktop onto this monitor”
checkbox
,
but do
NOT
click the
Apply
button at this time.