Getting to know the system
21
Note:
The Barco Coronis Fusion Display disposes of 2 video
inputs. You can connect both video inputs or just one input.
• When both inputs are used (DuoView), the signal on the “left”
DVI connector (6) is shown on the left side of the screen and
the signal on the “right” DVI connector (7) is shown on the
right side of the screen. The video resolution of both signals
must not exceed 1640x2048 pixels if you wish to display both
signals seamlessly side by side. If the video resolution is
higher, you can select to display only one input instead of
both.
Note:
For plug-and-play graphic boards (e.g., display
controller(s) for your B
ARCO
C
ORONIS
F
USION
Display System) the
output resolution of the graphic board(s) is determined by the
setting in the
Preferred Input
function in the on-screen display
(Settings menu). After changing this setting you need to reboot
the PC for the graphic board(s) to change the output resolution
accordingly.