![background image](http://html1.mh-extra.com/html/barco/coronis-fusion/coronis-fusion_getting-started-manual_3890436027.webp)
Installing the system
27
7.
Align the display controller(s) for your B
ARCO
C
ORONIS
F
USION
Display System with the slot(s) and press it(them) in firmly until
the card(s) is(are) fully seated.
8.
Note:
This step applies only to the MXRT 5100 and MXRT 7100.
Connect the power cable to the 6-pin power connection on the
graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Figure 7: Power connection for the MXRT 5100 and 7100 controllers
9.
Screw in or fasten the display controller securely. Replace and
secure the computer cover.
10.
Connect your B
ARCO
C
ORONIS
F
USION
Displays to the display
controller(s) for your B
ARCO
C
ORONIS
F
USION
Display System using
the cables supplied. Make sure all cables are securely connected
before turning on your system. Figures 8 and 9 show the types
of connections are available:
6-pin graphics controller
power cable