![background image](http://html1.mh-extra.com/html/barco/coronis-fusion/coronis-fusion_getting-started-manual_3890436037.webp)
Installing the system
37
The Barco Product Installation Wizard will now guide you
through the installation of MediCal QAWeb, BarcoMed SelfExam,
and the Barco on-line documentation.
7.
When the Setup complete message appears, select
Reboot
System Now
and click
Finish
.
8.
After the system reboots, Windows may display either the
Digital Signature Not Found
message or
The software you are
installing for this hardware has not passed Windows logo
testing to verify its compatibility with Windows XP
message. If it
does click
Yes
or
Continue
to complete the driver and software
installation.
Automated display configuration
Once the drivers, software and documentation have been installed
and your system has been rebooted, the
Barco Monitor Plug and Play
Software
should automatically detect your Barco displays and attach
them to the desktop with the correct resolution. If the
Barco Monitor
Plug and Play Software
fails to detect your Barco displays or fails to
attach them to the desktop correctly please refer to the section,
“Setting the resolution of your B
ARCO
C
ORONIS
F
USION
Display”
on
page 43 in the Troubleshooting section of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any time by
using the Barco Set-up wizard on your B
ARCO
C
ORONIS
F
USION
Display
System Installation CD-ROM, see
Installing the B
ARCO
MXRT drivers
and software
, on page 34 of this manual.
Uninstalling the drivers and software
To uninstall the Barco drivers, software or documentation for your
Barco Coronis Fusion Display Systems, please use the
Windows Add/