Barco Coronis 5MP Mammo, Getting Started Manual, Page: 33 / 88

Display Controller Installation
33
9.
Screw in or fasten the display controller securely. Replace and
secure the computer cover.
10.
Connect your B
ARCO
C
ORONIS
5MP M
AMMO
Displays to the display
controller(s) for your B
ARCO
C
ORONIS
5MP M
AMMO
Display System
using the cables supplied. Make sure all cables are securely
connected before turning on your system. Figures 6 - 12 show
the types of connections are available:
Connecting your Barco displays
For a detailed description of the display installation and signal
connection, please refer to the
“Display installation”
section of this
manual.
Figure 8:
IO-Panel for the Barco MXRT 1150 and Barco MXRT 2150
X
S-Video Connection
This option is not supported by Barco.
Y DMS-59 connector provides DVI-I / Head 1 & Head 2
output connections through included Y adaptor cable.