Barco CineVERSUM 110 Page 86 Owner'S Manual Download

Page: 86 / 153

8. Image Menu

Image 8-40

The AGC can be disturbing in case of Macrovision encoded signals, therefore the AGC can be disabled (OFF)
at any time

8.10 Manual Gain Control

What can be done ?

When

AGC on Video

is disabled, the gain of the incoming video signal can be set manually. The manual gain control must be done

on an external pattern with white areas (grey scale bar pattern).

How to set the Manual Gain Control ?

1. Press

MENU

to activate the menu bar.

2. Press

→

to select the

Image

item.

3. Press

↓

to pull down the

Image

menu.

4. Use

↑

↓

to select

Manual Gain Control.

(image 8-41)

5. Press

ENTER

to confirm.

A scroll bar is displayed. (image 8-42)

6. Use

←

→

to adjust the gain so that uniform white parts in the image are obtained.

Or,
use the numeric keys to enter the desired value.

Image 8-41

R5976697 CINEVERSUM™ 110 12/05/2004

Summary of Contents for CineVERSUM 110


























































































































































Search results

Summary of Contents for CineVERSUM 110

Reviews:

Related manuals for CineVERSUM 110

Brands by name

Popular brands

Barco CineVERSUM 110, Owner'S Manual

Search results

Summary of Contents for CineVERSUM 110

Reviews:

Related manuals for CineVERSUM 110

Brands by name

Popular brands