Barco CineVERSUM 110, Owner'S Manual

Page: 109 / 153

12. Image Files Menu
The measure of the total number of pixels per line can be done through 2 methods
• Limited scan: a windowing is used to allow fast tracking.
The operation takes about 20 seconds (depending on file)
• Full scan: tracking is done over the full range.
The operation takes about 1.5 minutes (depending on file)
How to launch Auto Image?
1. Press MENU to activate the menubar (image 12-3)
2. Press → to select the
Image files
item
3. Press ↓ to pull down the
Image files
menu
4. Use ↑ or ↓ to select
Auto Image
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired file scan method
7. Press ENTER
A text box showing a progress bar is displayed. (image 12-4)
Tip: Press the Cancel button to cancel the operation.
Image 12-3
Autoimage
Total pixels/lines
Start pixel/line
Phase
Contrast/brightness
Image 12-4
The Auto Image setup in the
Display setup
menu affect only Auto Image if it is launched via the RCU key or at
automatic file creation.
Launching Auto Image via the menu involves complete checking of all parameters.
Auto Image can also be launched via the RCU with the dedicated AutoImage key.
R5976697 CINEVERSUM™ 110 12/05/2004 105