Safety Instructions
1-2 ___________________________________________________________________________ R5975819.05 BARCO CINE 6 21112002
A. Mains lead (Power cord) with CEE 7 plug :
The wires of the mains lead are colored in accordance with the following code.
Green & Yellow
:
Earth (safety earth)
Blue
:
Neutral
Brown
:
Line (live)
B. Power cord with ANSI 73.11 plug :
The wires of the power cord are colored in accordance with the following code.
Green / Yellow
:
Ground
White
:
Neutral
Black
:
Line (live)
On safety
1
.
This product should be operated from an AC power source.
This projector may be connected to an IT-power system.
Operating AC power voltage of the projector:
BARCO CINE 6 :
Art. No. R9002372 (
With L PFC 85Vac to 250Vac)
2
.
This product is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit into
a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.
WARNING FOR THE CUSTOMER:
THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power
cable. (If the supplied power cable is not the correct one, consult your dealer.)
3.
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
4.
If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged
into the extension cord does not exceed the extension cord ampere rating. Also make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
5.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short
out parts that could result in a risk of fire or electrical shock.
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and have
it checked by qualified service personnel before resuming operations.
6.
Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet. This will prevent damage to the projector due to lightning and AC
power-line surges.
On installation
1.
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it.
2.
Do not use this equipment near water.
3.
Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near
or over a radiator or heat register.
The projector should not be placed in a built-in installation or enclosure unless proper ventilation is provided.
