G2 Adjustment
R5975819.05 BARCO CINE 6 21112002 ____________________________________________________________________________ A-1
G2 ADJUSTMENT
G2 adjustment
Enter the adjustment mode by pressing
ADJUST
and highlight
SERVICE
. Press
ENTER
to start up the service mode.
Highlight 'common settings' and press
ENTER
.
ENTER
starts up the common settings menu.
EXIT
returns to the adjustment mode menu.
Highlight G2 adjust and press
ENTER
.
A safety notice will be displayed to warn the operator.
If you are qualified, press
ENTER
to continue with the G2 adjustment, otherwise press
EXIT
to return to the service menu.
If
ENTER
is pressed, the G2 menu will be displayed.
Open the top cover to reach the G2 controls and adjust these G2 controls for red, blue and green separately.
Look to the projected image and observe the raster behind the image while the ABL function is ON.
Switch the ABL to OFF by pressing
ENTER
and adjust the G2 control until the raster brightness looks the same as when the
ABL function is ON.
Check the correct raster adjustment by pressing
ENTER
to toggle ABL to ON. Repeat these steps if necessary.
Continue with the other colors. Use the right or left arrow key to select the next color.
Note : The best result is obtained in a completely dark room or by looking into the lenses, but be aware that
brightness and contrast are on a high level.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return.
A
SAFETY
NOTICE
RISK OF ELECTRICAL SHOCK
G2 ADJUSTMENT SHOULD BE
PERFORMED ONLY BY
QUALIFIED INSTALLATION OR
SERVICE PERSONNEL.
AS USER OR OPERATOR :
PRESS <EXIT> NOW
AS QUALIFIED PERSONNEL
PRESS <ENTER>
Select color with or
<ENTER> to toggle ABL
<EXIT> to return.
G2 ADJUSTMENT
RED
ABL : ON
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then <ENTER>
<EXIT> to return.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
MEMORY BANKS : off / on