Barco Baron 908 R9040060, Owner'S Manual

Page: 76 / 100

Service mode
6 - 8 5976419 BARON 908 04122001
Select with é or ê
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with é or ê
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
COPY SOFT EDGE BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
menu 1 menu 2
Copy a block
What can be done ?
The copy a block function copies the settings of a selected block into the active block.
How to copy ?
To copy a block :
1. Push the cursor key é or ê to highlight 'Copy a Block' (menu 1).
2. Press ENTER to select.
The copy menu will be displayed (menu 2).
To copy the settings of a closed block to the block you are working on (active block),
3. Push the cursor key é or ê to select a block.
4. Press ENTER to copy the selected block.
All current settings will be overwritten with the settings of the block which is copied.
A confirmation screen will be displayed (menu 3).
5. ENTER to confirm.
EXIT cancels the copy procedure and returns without copying the block.
Memory management
What can be done ?
Within the memory management menu, the following items can be consultated or executed :
- copy a block
- copy soft edge block
- delete a block
- delete all blocks
- set to midposition
How to select ?
To select Memory Management :
1. Push the cursor key é or ê to highlight Memory Management (menu 1).
2. Press ENTER to select.
The memory management menu will be displayed (menu 2).
Select with é or ê
then <ENTER>
<EXIT> to return.
MEMORY MANAGEMENT
COPY A BLOCK
COPY SOFT EDGE BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with é or ê
<ENTER> to copy
<EXIT> to return.
COPY MODE
Nr. Src Fh Fv inp conf
1 1 15.6 50 video FC
2 3 31.2 60 RGB3S R T
3 - 15.6 50 intern FC
4 2 31.5 50 RGB3S FC
5 - 33.7 60 intern FC
6
7
8
Active block nr. 1
COPY BLOCK
All settings
in current block
will be overwritten !
<ENTER> to confirm
<EXIT> to cancel
menu 1 menu 2
menu 3