5975248 BARCOVISION 701 MULTIMEDIA 070597
INSTALLATION ADJUSTMENTS
IN
S
T
ALLATI
O
N
ADJ
US
TME
N
TS
INSTALLATION ADJUSTMENTS
IN
S
T
ALLATI
O
N
ADJ
US
TME
N
TS
5975248 BARCOVISION 701 MULTIMEDIA 070597
7-17
7-17
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
ENTER continues to the path selec-
tion menu.
EXIT returns to the CRT projection
angle adjustment.
blue crosshair
green crosshair
blue crosshair
green crosshair
Move the bleu CRT
to the outside, away
from the green CRT
Move the bleu CRT
towards the green
CRT
After finishing the installation adjust-
ments procedure, the 'Path selection'
returns on the screen. You are now
able to start the alignment procedure
for the projector. You have the choice
between :
- Guided Adjustment Procedure
- Random Access Adjustment Proce-
dure
The result of both procedures will be
the same. More explanation about
both procedures is given in the own-
ers manual.
The following page gives an overview
of the image corrections.
ADJUSTMENT MODE
source 1
Select with or
then <ENTER>
<EXIT> to return
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Loosen the four hexagon screws C, C',
Dand D', upper and lower fixation latch.
These screws fasten the cooling house
of the blue tube.
Pivot the blue CRT until the center of
the blue image coincides with the center
of the green image. If the angle of the
red CRT is corrected, tighten the four
bolts.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
ENTER continues to the path selection
menu.
EXIT returns to the CRT projection an-
gle adjustment.
blue crosshair
green crosshair
blue crosshair
green crosshair
Move the bleu CRT
to the outside, away
from the green CRT
Move the bleu CRT
towards the green
CRT
After finishing the installation adjust-
ments procedure, the 'Path selection'
returns on the screen. You are now
able to start the alignment procedure
for the projector. You have the choice
between :
- Guided Adjustment Procedure
- Random Access Adjustment Proce-
dure
The result of both procedures will be
the same. More explanation about
both procedures is given in the owners
manual.
The following page gives an overview
of the image corrections.
ADJUSTMENT MODE
source 1
Select with or
then <ENTER>
<EXIT> to return
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Loosen the four hexagon screws C, C',
Dand D', upper and lower fixation latch.
These screws fasten the cooling house
of the blue tube.
Pivot the blue CRT until the center of the
blue image coincides with the center of
the green image. If the angle of the red
CRT is corrected, tighten the four bolts.
Summary of Contents for BarcoVision R9000740
Page 4: ...TABLE OF CONTENTS 5975248 BARCOVISION 701 MULTIMEDIA 070597 i II TABLE OF CONTENTS ...
Page 12: ...5975248 BARCOVISION 701 MULTIMEDIA 090497 SAFETY INSTRUCTIONS 1 8 SAFETY INSTRUCTIONS ...
Page 34: ...PROJECTOR SET UP 5975248 BARCOVISION 701 MULTIMEDIA 070597 5 4 PROJECTOR SET UP ...
Page 40: ...5975248 BARCOVISION 701 MULTIMEDIA 090497 POWER CONNECTION 6 6 POWER CONNECTION ...