INSTALLATION SET UP
5975248 BARCOVISION 701 MULTIMEDIA 070597
INSTALLATION SET UP
5975248 BARCOVISION 701 MULTIMEDIA 070597
4-6
IN
S
T
ALLATI
O
N
S
E
T
UP
4-6
IN
S
T
ALLATI
O
N
S
E
T
UP
A : Horizontal scan inversion
Three connectors are used, one for each horizontal deflection coil. When changing
the horizontal scan, insure that all three connectors are set in the same position. See
position of the connectors for the corresponding projector configuration.
B : Vertical scan inversion
Three connectors are used, one for each vertical deflection coil. When changing the
vertical scan, insure that all three connectors are set in the same position. See
position of the connectors for the corresponding projector configuration.
Top view of the connectors; upper three connectors for horizontal scan inversion,
lower three for vertical scan inversion.
Front / Table
Front / Ceiling
Rear / Table
Rear / Ceiling
Horizont al scan
connectors
Vertical scan
connectors
C : Convergence connectors
Three connectors are used. The position of these
connectors has to be changed when switching from one
configuration to another.
With an open chassis, for a front-table or a rear ceiling
configuration, the connectors must be plugged in with the
contacts upwards (away from the tubes). For a front-
ceiling or rear-table configuration, the connectors must
be plugged in with the contacts facing the tubes
Contact side
A : Horizontal scan inversion
Three connectors are used, one for each horizontal deflection coil. When changing
the horizontal scan, insure that all three connectors are set in the same position. See
position of the connectors for the corresponding projector configuration.
B : Vertical scan inversion
Three connectors are used, one for each vertical deflection coil. When changing the
vertical scan, insure that all three connectors are set in the same position. See
position of the connectors for the corresponding projector configuration.
Top view of the connectors; upper three connectors for horizontal scan inversion,
lower three for vertical scan inversion.
Front / Table
Front / Ceiling
Rear / Table
Rear / Ceiling
Horizont al scan
connectors
Vertical scan
connectors
C : Convergence connectors
Three connectors are used. The position of these
connectors has to be changed when switching from one
configuration to another.
With an open chassis, for a front-table or a rear ceiling
configuration, the connectors must be plugged in with the
contacts upwards (away from the tubes). For a front-
ceiling or rear-table configuration, the connectors must
be plugged in with the contacts facing the tubes
Contact side
Summary of Contents for BarcoVision R9000740
Page 4: ...TABLE OF CONTENTS 5975248 BARCOVISION 701 MULTIMEDIA 070597 i II TABLE OF CONTENTS ...
Page 12: ...5975248 BARCOVISION 701 MULTIMEDIA 090497 SAFETY INSTRUCTIONS 1 8 SAFETY INSTRUCTIONS ...
Page 34: ...PROJECTOR SET UP 5975248 BARCOVISION 701 MULTIMEDIA 070597 5 4 PROJECTOR SET UP ...
Page 40: ...5975248 BARCOVISION 701 MULTIMEDIA 090497 POWER CONNECTION 6 6 POWER CONNECTION ...
