Barco BarcoVision R9000740, Installation Manual

Page: 56 / 64

INSTALLATION ADJUSTMENTS
5975248 BARCOVISION 701 MULTIMEDIA 070597
INSTALLATION ADJUSTMENTS
5975248 BARCOVISION 701 MULTIMEDIA 070597
7-16
IN
S
T
ALLATI
O
N
ADJ
US
TME
N
TS
7-16
IN
S
T
ALLATI
O
N
ADJ
US
TME
N
TS
red crosshair
green crosshair
red crosshair
green crosshair
Move the red CRT
to the outside, away
from the green CRT
Move the red CRT to-
wards the green CRT
Screws A, B, C and D (M4) : upper
fixation latch. nutdriver 7mm.
Screw A', B', C' and D' (M4) : lower
fixation latch. nutdriver 7mm.
Loosen the four hexagon screws A,
A', B and B', upper and lower fixation
latch. These screws fasten the cool-
ing house of the red tube.
Pivot the red CRT until the center of
the red image coincides with the center
of the green image. If the angle of the
red CRT is corrected, tighten the four
bolts.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
ENTER continues to blue and green
crosshairs.
EXIT will return to CRT projection angle
adjustment.
A'
B'
C'
D' A
B
C
D
A' A B'
C'
B
C D' D
red crosshair
green crosshair
red crosshair
green crosshair
Move the red CRT
to the outside, away
from the green CRT
Move the red CRT to-
wards the green CRT
Screws A, B, C and D (M4) : upper
fixation latch. nutdriver 7mm.
Screw A', B', C' and D' (M4) : lower
fixation latch. nutdriver 7mm.
Loosen the four hexagon screws A, A',
B and B', upper and lower fixation
latch. These screws fasten the cool-
ing house of the red tube.
Pivot the red CRT until the center of
the red image coincides with the center
of the green image. If the angle of the
red CRT is corrected, tighten the four
bolts.
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
ENTER continues to blue and green
crosshairs.
EXIT will return to CRT projection angle
adjustment.
A'
B'
C'
D' A
B
C
D
A' A B'
C'
B
C D' D