Barco BARCOELM R18 Owner'S Manual Download

Page: 60 / 127

7. Random Access Adjustment Mode

4. Press

ENTER

to select.

If [all] is selected, your password has to be entered before all files will be deleted.

A confirmation menu "Delete file ’file name’?" is displayed. (menu 7-22)

5. Press

ENTER

to delete the file, press

EXIT

if you want to keep it.

Note:

The active file cannot be deleted.

FILE SERVICE

LOAD
EDIT

RENAME

COPY

DELETE

OPTIONS

Select with

↑

↓

then <ENTER>

<EXIT> to return

Menu 7-20

DELETE FILE

Filename

Src

resolution

video525.s01 1

675x240i

video525.c01 1

675x240i

video525.c02 1

675x240i

-------------------------------
Active file : Video525.c50

Select with

↑

↓

→

<ENTER> to accept

<EXIT> to return

Menu 7-21

CONFIRM

DELETE FILE

Delete file :
Video525.c01?

<ENTER> to confirm

<EXIT> to return

Menu 7-22

7.2.9

File Options

Start up

1. Push the cursor key

↑

↓

to highlight

Options

. (menu 7-23)

2. Press

ENTER

The option selection menu will be displayed. (menu 7-24)

FILE SERVICE

LOAD
EDIT

RENAME

COPY

DELETE

OPTIONS

Select with

↑

↓

then <ENTER>

<EXIT> to return

Menu 7-23

FILE OPTIONS

FILE SORT [NAME]

FILE LOAD [AUTOMATIC]

Select with

↑

↓

then <ENTER>

<EXIT> to return

Menu 7-24

File Sort

1. Press

ENTER

to toggle between [name] and [index].

[name] : the files in the list will be sorted on the file name.

[index] : the files in the list will be sorted on the file extension.

File Load

1. Press

ENTER

to toggle between [automatic] and [manual].

[automatic] : correct file will be loaded automatically.

[manual] : correct file has to be loaded manually.

7.3 Picture Tuning

Overview

•

•

•

•

•

•

•

R5976333 BARCOELM R18 17092002

Summary of Contents for BARCOELM R18
































































































































Search results

Summary of Contents for BARCOELM R18

Reviews:

Related manuals for BARCOELM R18

Brands by name

Popular brands

Barco BARCOELM R18, Owner'S Manual

Search results

Summary of Contents for BARCOELM R18

Reviews:

Related manuals for BARCOELM R18

Brands by name

Popular brands