Barco BARCOELM R18, Owner'S Manual

Page: 61 / 127

7. Random Access Adjustment Mode
7.3.1 Start up
Start up
To improve the image quality, the items in the Picture Tuning menu can be toggled or adjusted. To start up the Picture Tuning :
1. Push the cursor key
↑
or
↓
to highlight
Picture Tuning
. (menu 7-25)
2. Press ENTER to select.
The picture tuning menu will be displayed. (menu 7-26)
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
SCENERGIX
PIP
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-25
PICTURE TUNING
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-26
7.3.2 Color Temperature
Available Color temperatures
• Projector white
• Broadcast 3200K
• Film 5400K
• Video 6500K
• Computer 9300K
• Custom balance
Start Up
1. Push the cursor key
↑
or
↓
to highlight
Color Temperature
. (menu 7-27)
2. Press ENTER to select.
The color temperature selection menu will be displayed. (menu 7-28)
PICTURE TUNING
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-27
COLOR TEMPERATURE
PROJECTOR WHITE
COMPUTER 9300K
VIDEO 6500K
FILM 5400K
BROADCAST 3200K
CUSTOM BALANCE
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 7-28
Adjusting the color balance
1. Adjusting the color balance by selecting a fixed color balance ?
Push the cursor key
↑
or
↓
to highlight one of the preprogrammed color balances. Press ENTER to select
Note:
Projector white will provide maximum projector light output. The calibrated ’Broadcast’, ’Film’, ’Video’ and ’Computer’
presets will provide optimum color tracking.
If no, go to step 2
2. Push the cursor key
↑
or
↓
to adjust red and push the cursor key
←
or
→
to adjust blue (range 0 to 2.5)in comparison with the
green color. (image 7-3)
R5976333 BARCOELM R18 17092002 57