Barco Athena Installation Manual Download Page 18

Page: 18 / 184

R5906790 /04

Athena

2.6 Safety precautions Hazardous Chemicals

Cleansing agent: sodium carbonate crystals (Na

)

Handling the cleansing agent:

•

Conserve the product in the original container in a cool, well ventilated place.

•

Keep away from Incompatible materials: sources of ignition, direct sunlight.

•

Keep container closed when not in use.

•

After handling: Wash hands and other exposed areas with mild soap and water.

Personal protection rules:

•

Handle the cleansing agent in a well ventilated area.

•

Do not eat, drink or smoke during use.

•

Wear gloves (Butyl rubber, PVC....) and goggles.

•

Wear suitable protection clothing.

WARNING:

Before handling Hazardous Chemicals ensure that you have read and understood the

safety instructions provided by the supplier of the chemical in the Safety Data Sheet.

Safety Data Sheets for Hazardous Chemicals

For safe handling information on chemical products, consult the Safety Data Sheet (SDS). SDSs are available
upon request via [email protected].

Safety

Summary of Contents for Athena

























































































































































































Search results

Summary of Contents for Athena

Reviews:

Related manuals for Athena

Brands by name

Popular brands

Barco Athena, Installation Manual

Search results

Summary of Contents for Athena

Reviews:

Related manuals for Athena

Brands by name

Popular brands