Barco Athena Installation Manual Download Page 123

Page: 123 / 184

R5906790 /04

Athena

123

Tighten the three retaining screws (3) of the Lamp House. Use a 7mm nut driver or a flat screw driver.

Image 13-6

Close the fan door (2) and tighten the retaining screw (1) of the fan door.

Image 13-7

Install the rear cover of the projector. See

“

Installation of the rear cover

”

, page 149.

13.4 Resetting the lamp parameters

CAUTION:

The LAMP INFO parameters must be updated any time a Lamp Module is replaced.

Neglecting to do this will result in poor performance and a reduced lamp lifetime.

How to reset the lamp parameters?

In the Communicator software, click on

Installation

(1) and click on

Lamp

(2).

Lamp House

Summary of Contents for Athena

























































































































































































Search results

Summary of Contents for Athena

Reviews:

Related manuals for Athena

Brands by name

Popular brands

Barco Athena, Installation Manual

Search results

Summary of Contents for Athena

Reviews:

Related manuals for Athena

Brands by name

Popular brands