33
Spectro LFP qb - Operating Manual
4.10 Spectro LFP qb with Barbieri Gateway software
The function of this software is to allow you to drive a BARBIERI mea-
suring device if your particular software (RIP etc.) does not support the
device directly.This software will measure any type of targets and save
a measuring file in text or XML format. The software runs under either
Windows or Mac OSX and delivers measurement data either spectral,
CIELab or density.
Please make sure to use Gateway version 4.5 or newer fo rfull support
of all features of this instrument.
The software is available for download at the following web-site:
http://www.barbierielectronic.com
4.11 Spectro LFP qb with other software
When using software from a different manufacturer than Barbieri, please
see the operating manual of your software on how to use the Spectro
LFP qb with your software or use the above applications with file import.
Please note that the Spectro LFP qb is compatible with the Barbieri
Spectro LFP S3 instrument and therefore can be used in compatibility
mode with any software supporting the Spectro LFP S3 device.
The default measurement condition/ illumination type to be used to
be compatible with Spectro LFP S3 measurements is M0, M2 or M3
respectively. This can be selected manually by selecting the measur-
ing condition in the status bar. A menu pops up allowing selection of
condition to be used.
Additionally the selection of M1 condition is allowed.
