12
11
Install Side Shelves
Remove pre-assembled 1 Pan Head Screw 3/16"x1/2" and 2 Countersunk Flat Head Screws
3/16"x1/4" from the Right Bowl Side Panel as shown. Keep the 1 Pan Head Screw 3/16"x1/2"
for reinstallation.
Attach the Right Side Shelf onto the Right Bowl Side Panel using 4 Hex Head Screw 3/16"x3/8"
and the removed 1 Pan Head Screw 3/16"x1/2" and tighten securely.
Repeat the same steps for the Left Side Shelf installation.
Hex Head Screw 3/16"x3/8"
Qty. 8
Part # S162G03064
Pan Head Screw 3/16"x1/2"
Qty. 2
Part # S182G03081
Already installed in grill bowl
12
Install Transformer
Open the Doors, locate the 4 key holes on the right side of Cart Rear Panel as shown.
Attach Transformer to the Cart Rear Panel by inserting 4 stud bolts on the Transformer into the 4 key
holes on the Cart Rear Panel.
Press the Transformer downwards until it rest firmly in place
.
(See Fig.1)
Insert Transformer-Plug into Transformer-Socket and tighten securely.
(See Fig. 2)
Pull out the Transformer Cord from the hole on the left side of Cart Rear Panel.
Connect the Transformer power supply cord plug into a properly grounded 120V AC outlet.
Turn on the Grill Lights by pushing the Light Switch on the Control Panel.
Countersunk Flat Head Screw
3/16"x1/4"
Qty. 4
Part # S112G03041
2
1
Side Shelf, Left
Side Shelf, Right
Pan Head Screw
3/16"x1/2"
2
Countersunk Flat
Head Screw
3/16"x1/4"
(Take away)
Transformer
Fig. 2
Wire
Transformer-socket
Transformer-plug
AC-plug
Fig. 1
For illustration purposes, the
Grill Head is not shown.
Pull the Transformer
Cord out from the
hole.
