13
Install LED Control Box(For OB26 & OB32 only)
Open the Doors, locate the LED Control Box on the right side.
The LED Control Box is assembled with a old Mounting Bracket for built-in model. Detach the Bracket
by removing the two screws.(
See Fig.3
)
Replace the Bracket for Cart model. Attach the new Mounting Bracket to the Control Box by using the same
screws removed and tighten securely.(
See Fig. 4
)
Attach 2 Pan Head Screws 3/16"x3/8" to the front inside edge of Right Cart Side Panel as shown. Tighten
the screws only half way. Install the Control Box to the Right Cart Side Panel by aligning the two keyholes
in the Mounting Bracket with two screws. Make sure the screw heads are engaged with keyhole slots,
pressing the Bracket downward until it rest in place firmly. Double check the wire outlet of the Control
Box is facing downward prior tightening the screws to secure the Control Box in place as shown.
13
Pan Head Screw 3/16"x3/8"
Qty. 2
Part # S182G03061
Fig. 3
Fig. 4
Old Mounting Bracket
New Mounting Bracket
Control Box
Control Box
Pan Head Screw
3/16"x3/8"
