Assembly Instructions for Model UN2616ACT & UN3216ACT
1
CAUTION
: Even though it is possible for one person to assemble this grill, it is better to obtain assistance from
another person when handling the large, heavy pieces.
2
7
Pan Head Screw 1/4"x3/8"
Qty. 4
Part # S182G04061
Pan Head Screw 3/16"x3/8"
Qty. 8
Part # S182G03061
Attach the Left Front(LF) and Left Rear(LR) Caster Seats on the Left Cart Side Panel using 2 Pan Head
Screws 1/4"x3/8" and 4 Pan Head Screws 3/16"x3/8" and tighten securely as shown.
Repeat the same steps on the Right Side.
Install Caster Seats
Install Cart Bottom Panel, Lower Door Brackets and Door Guide Plate
Attach Cart Bottom Panel to both Side Panels.
Make sure the holes on the panels are aligned as shown
. Insert
4 Pan Head Screws 3/16"x3/8". Do not fully tighten the screws until the step 3 is fully completed.
Secure the Caster Seats from the underside of the Cart Bottom Panel using 8 Pan Head Screws 1/4"x3/8".
Install the Left/Lower and Right/Lower Door Brackets onto Cart Side Panels using 4 Pan Head Screws
3/16"x3/8" and tighten securely.
Attach the Door Guide Plate to the Cart Bottom Panel using 2 Pan Head Screws 3/16"x3/8" and tighten securely.
Pan Head Screw 3/16"x3/8"
Qty. 10
Part # S182G03061
Pan Head Screw 1/4"x3/8"
Qty. 8
Part # S182G04061
Cart Side Panel, Left
Cart Side Panel, Right
Caster Seat
Door Bracket,
Lef t/Lower
Door Guide Plate
Cart Bottom Panel
Pan Head Screw
1/4"x3/8"
LF
LR
Pan Head Screw
3/16"x3/8"
Pan Head Screw
1/4"x3/8"
Pan Head Screw
3/16"x3/8"
Pan Head Screw
3/16"x3/8"
RF
RR
Note: The gas tank
hole should be on
the left side.
Pan Head Screw
3/16"x3/8"
Pan Head Screw
3/16"x3/8"
