12
3
Connect Transformer to Power Source and turn on Grill Lights(For BTH3216BLP/NG model only)
Make a hole on the rear panel of the Island for transformer cord. Pull the transformer cord out from
the hole, make sure the cord does not touch the ground.
Connect the transformer power supply cord plug to a properly grounded 120VAC outlet.
Turn on the grill lights by pushing the light switch on the control panel.
NOTE:The island shown below is for illustrative purpose.
Make a hole on your Rear Island
Panel so that the transformer cord can
be connected to the grounded outlet
through the hole.
4
Install Natural Gas(NG) Regulator and 12 Foot Hose
Connect the NG regulator to the inlet of gas manifold and tighten securely. (
See Fig. 4
)
Connect the swivel nut of the 12 ft. NG hose(Not provided) to the vertical fitting of the NG Regulator.
NOTE: Keep the 12 ft. NG hose away from the sharp edges..
Gas Manifold
NG Regulator
Swivel Nut of
12' Hose
Vertical fitting
Fig. 4
