15
USE AND CARE INSTRUCTIONS
!
WARNING
!
Refer to the this table when designing the island unit
for the B3812BLP/NG & BAI12BLP/NG. Side* and
Rear* show the minimum amount of distance the unit
must be from combustibles (ex. Vinyl or wood siding,
fences and overhangs) or sources of ignition (ex. Pilot
lights on water heaters and live electrical appliances).
Height* shows the minimum height the island unit
must be starting from the ground up.
Proper ventilation
is required for all gas types.
Brush soapy solution onto LP Gas tank in the ar-
eas indicated by the arrows. See diagram.
If growing bubbles appear do not use or move the
LP Gas tank. Call an LP Gas Supplier or your Fire
Department.
NOTE about LP Gas Tank Exchange Programs
Many retailers that sell grills offer you the option of
replacing your empty LP Gas tank through an exchange
service. Use only those reputable exchange compa-
nies that inspect, precision fill, test and certify their
tanks. Exchange your tank only for an OPD safety fea-
ture-equipped tank as described in the LP Gas tank
section of this guide.
How to Leak Test your LP Gas Tank
Use a clean paintbrush and a 50/50 mild soap and
water solution.
For your safety:
Leak test new and exchanged LP Gas tanks BEFORE
connecting one to your grill.
Always keep new and exchanged LP Gas tanks in an
upright position during use, transit or storage.
All leak tests must be repeated each time your LP
Gas tank is exchanged or refilled.
When checking for gas leaks do not smoke.
Do not use an open flame to check for gas leaks.
Your grill must be leak tested outdoors in a well-ven-
tilated area, away from ignition sources such as gas
fired or electrical appliances. During the leak test, keep
your grill away from open flames or sparks.
Do not use household cleaning agents. Damage to
gas assembly components can result.
Ÿ
Ÿ
Ÿ
If growing bubbles appear do not use or move the
LP Gas tank. Contact an LP Gas Supplier or your
fire department!
WARNING
!
!
Side*
Depth
Height
Width
Non-combustible
Construction
Rear*
6" minimum
clearance from
cutout (for lid)
Height*
Model
Height
Width
Depth
Side* Rear* Height*
B4019B
LP/NG
10"
38-1/2"
23
36"
36"
29"
