Page 8
Assembly instructions
STEP 1:
Attach Castors.
STEP 2:
Attach the Cart Side Panel.
WHAT YOU NEED:
two x Castors without lock (23)
two x Castors with lock (24)
one x Base panel (6)
sixteen x M6*16mm screws (A)
sixteen x M6 flat washer (D)
sixteen x M6 spring washer (E)
Use four M6*16mm screws (A),
four M6 flat washers (D) and four
M6 spring washers (E) to attach
each castor onto the underside
of the base panel (6) (two castors
without lock (23) at the front and
two castors with lock (24) at the
back).
WHAT YOU NEED:
one x Left side cart panel (7)
one x Right side cart panel (8)
four x M6*12mm screws (B)
Use two M6*12mm screws (B)
to attach cabinet left side panel
(7) and two more screws to
attach cabinet right side panel
(8) both to the base panel (2).
Note: Door hinge brackets
should be at the front.
FRONT
RIGHT
B x two x 2
24 x two
23 x two
A x four x 4
D x four x 4
E x four x 4
