Page 11
Assembly instructions (continued)
STEP 7:
Fit the Grease Channelling Tray.
STEP 8:
Attach the Doors.
WHAT YOU NEED:
one x Grease channelling tray (14)
Slide the grease channelling tray (14)
into the grease tray rails.
Make sure the drain hole in the
grease channelling tray lines up with
the drain hole in the separator panel.
BACK
(b)
WHAT YOU NEED:
four x Door hinges (22)
two x Doors (11)
twenty-four x M4*10mm
screws (C)
a) Attach door hinges (22) to
the cabinet left (7) & right
(8) side panels top and
bottom, each hinge with
four M4*10mm screws (C).
b) Attach the doors (11) to the
hinges with two M4*10mm
screws (C) on each hinge.
a)
C x four x 4
C x two x 4
22 x four
11 x two
