Page 16
Assembly instructions (continued)
STEP 16:
Attach the side burner.
Ensure the burner tube is engaged onto
the valve nozzle as shown.
WHAT YOU NEED:
one x Spill tray and side burner (kept
aside from STEP 11)
one x Side burner trivet (kept aside
from STEP 11)
three x M4*10mm screws (kept aside
from STEP 11)
three x fibre washers (kept aside
from STEP 11)
a) Fit the spill tray and side burner
through the shelf and engage the
side burner tube onto the valve
nozzle as shown.
b) Fix the spill tray and side burner
firmly in place with three M4*10mm
screws and fibre washers as shown.
Make sure the side burner tube is
properly engaged onto the valve
nozzle.
c) Fit the ignition wire onto the bottom
of the ignition pin.
d) Fit the side burner trivet into the
three holes in the side burner shelf
as shown.
