Page 10
Assembly instructions (continued)
STEP 5:
Attach the Grease Cup Bracket and Cabinet Separator Panel.
STEP 6:
Attach the Grease Tray Rails.
WHAT YOU NEED:
one x Grease cup bracket (27)
one x Cabinet Separator Panel (13)
two x M6*12mm screws (B)
eight x M4*8mm screws (G)
a) Attach the grease cup bracket (27)
to cabinet separator panel (13)
with five M4*8mm screws (G).
b) Attach the cabinet separator panel
assembly to left and right side
panel. Push the side panels
outwards gently to fit the separator
panel. Use two M6*12mm
screws (B) at the back and keep
the screws loose, then use three
M4*8mm screws (G) at the front.
c) Tighten all screws.
WHAT YOU NEED:
one x Left grease tray rail (15)
one x Right grease tray rail (16)
four x M6*12mm screws (B)
Attach the left and right grease
tray rails (15/ 16) to the left and
right side panels with two
M6*12mm screws (B) on each
side, as shown.
G x five
B x four
27
G x three
BACK
FRONT
Note: Make sure that the
grease cup bracket (27)
is on the side shown.
BACK
B x two
