background image

Contents

1

 About this document................................................................................ 6

1.1

 How to work with this document.................................................................................................. 6

1.2

 Warnings and cautions used in this document............................................................................ 6

1.3

 Related documentation................................................................................................................6

2

 Description............................................................................................... 7

2.1

 Intended use................................................................................................................................ 7

2.2

 Installation options....................................................................................................................... 7

2.3

 Overview of the appliance............................................................................................................8

2.4

 Overview of the burner bed and the pilot light............................................................................. 9

2.5

 Overview of the ceramic log set.................................................................................................10

2.6

 Overview of the control elements...............................................................................................13

2.6.1  Overview of the rear of the gas regulator block.............................................................. 13

2.6.2  Overview of the front of the gas regulator block..............................................................14

2.6.3  Overview of the connections on the gas regulator block.................................................15

2.6.4  Overview of the receiver................................................................................................. 16

2.6.5  Overview of the fan/light module.....................................................................................17

2.7

 Examples of a typical installation...............................................................................................18

3

 Safety.....................................................................................................20

3.1

 Safety devices on the appliance................................................................................................ 20

3.2

 Safety instructions for installation.............................................................................................. 20

3.3

 Safety instructions with regard to the environment....................................................................21

4

 Clearances.............................................................................................22

4.1

 Insulating material requirements................................................................................................22

4.2

 Clearances to flammable walls.................................................................................................. 22

4.3

 Clearance to flammable floor (under the appliance)..................................................................23

4.4

 Clearances to flammable ceiling................................................................................................23

4.5

 Clearances to non-flammable walls...........................................................................................24

4.6

 Clearances to a non-flammable ceiling......................................................................................25

4.7

 Clearances in front of the appliance.......................................................................................... 27

4.8

 Mantel clearances......................................................................................................................27

4.9

 Clearances for concentric flue system.......................................................................................30

4.10  Clearances for TV installation....................................................................................................31

Contents

Gas Fire Panorama 110-55

3

Summary of Contents for Panorama 110-55 PF2





















































































Reviews: