barbas Falcon 80/56, Installation And Maintenance Manual

Page: 23 / 40

IItem Description
C Insulation plate Plate of non-combustible material with a thickness of at least 100
mm and a thermal conductivity of at least 0.10 W/m.K
D Air gap Space between insulation plate and wall. Width of air gap at least 20
mm
E Wall Existing side and/or rear wall made of combustible material or load-
bearing wall
Caution:
• Put a non-combustible insulating plate with a thickness of at least 40 mm
and a thermal conductivity of not more than 0.10 W/m.K on a distance of at
least 50 mm from a combustible ceiling.
Table 7: Installation against a combustible ceiling
Item Description
A Appliance
B Ventilation air outlet
Outlet of heated air from the chimney breast
C Insulation plate Plate of non-combustible material with a thickness of at least 40 mm
and a thermal conductivity of at least 0.10 W/m.K
D Air gap Space between insulation plate and wall. Width of air gap at least 50
mm
E Ceiling Existing ceiling made of combustible material
Caution:
• Make sure that brickwork is build with a clearing of at least 3 mm between
the sides and top of the appliance and the brickwork. The appliance can
expand during operation due to heating.
Installation
Falcon 80/56 23