background image

TTable 4: Bottom view with combustion air inlet box

Item

Description

N

Combustion air inlet Provides the appliance with combustion air.

R

Combustion air inlet

box

Box with inlet openings for the combustion air.

S

Adjustable feet

4 adjustable feet to level the appliance.

T

Adjustable height

frame (option)

Set of 2 adjustable frames with 2 adjustable feet each to put the ap-

pliance on a higher position.

4.2

Intended use

The appliance is intended for indoor use to heat the room wherein it is installed. Do not

use it for other purposes.

The appliance is intended for use with wood logs or wood briquettes as fuel. Do not use

other fuels.

The appliance is intended for use with the door closed.

The appliance may only be used at the location that meets the requirements for the

installation of the appliance.

The appliance is intended for intermittent use and is not intended for continuous use.

The appliance is intended to heat the room by direct heating. It is not allowed to connect

the appliance to a central-heating installation.

4.3

Installation options

Description

Falcon 80/56

11

Summary of Contents for Falcon 80/56









































Reviews: