3. Lift the 2 grate plates and remove
from the combustion chamber.
9.4.5
Remove the cast iron rear panels
Only do this procedure after finish of the procedure in section
.
There are 4 cast iron rear panels. Three panels are hooked into each other. The fourth
panel is the fitting piece. The location of this panel is on the left side or the right side.
1. Identify the fitting piece. The fitting
piece is the most left or the most right
panel on the rear wall.
2. Move the bottom plate that is in front
of the fitting piece to the center (1).
3. Lift the fitting piece a small distance
and remove (2).
1
2
Maintenance
BOX 30 75
29
Summary of Contents for BOX30 75
Page 45: ...Warranty Terms BOX 30 75 45...
Page 46: ...Warranty Terms 46 BOX 30 75...
Page 47: ...Warranty Terms BOX 30 75 47...
