6.2.5
Disassembly of burners and burner bed
Warning:
Before the start of this procedure make sure the appliance is off
and cooled down to room temperature.
Figure 40. Position of ceramic wood logs and burners
1.
Remove the glass panes. Refer to chapter
2.
Carefully remove the small decorative wood logs.
3.
Carefully remove ceramic wood logs A and B.
4.
Unscrew the 2 screws holding burners A and B.
5.
Remove burners A and B.
6.
Carefully remove ceramic wood logs C, D and E.
7.
Unscrew the 3 screws holding burners C, D and E.
8.
Remove burners C, D and E.
9.
Remove the fire glass
10. Remove the 2 grates.
To assemble the burner and burner bed do the procedure above in reverse order. See
also chapter
6.2.6
Clean the standard glass
Warning:
Before the start of this procedure make sure the appliance is off
and cooled down to room temperature.
Caution:
If you have anti-reflective glass, refer to chapter
, to avoid damage to the
anti-reflective coating on the glass.
1.
Clean the glass with a soft cloth, a sponge or paper. Use glass cleaner or ceramic
hob cleaner.
2.
Make sure that the glass is dry. Water droplets can leave a mark on the glass.
Maintenance
62
Gas Fire Front 90-75
Summary of Contents for 90-75 PF2
