5.2.10
Build the fireplace
Safety conditions
Warning:
Do not cover the top side of the appliance with brickwork, plates or
any other material.
Caution:
• Remove the door (including glass). See
• Remove the frame to prevent damage of the frame during work. See
• Make sure that the gas piping remains free of cement or other building
material. Otherwise, the gas piping can start to leak.
• Make sure that brickwork is build with a clearing of at least 3 mm between
the sides and top of the appliance and the brickwork. The appliance can
expand during operation due to heating.
• Do not use masking tape on the appliance. Masking tape can damage the
finish of the appliance.
• Do not build the brickwork higher than the casing without the use of a
mantel iron.
Note:
• Make sure that the front opening of the appliance remains entirely free of
building materials. The glass plate must remain easy to dismantle and
mount.
• Make sure that the thickness of any plastering is taken into account when
making the brickwork.
• If you use other material than bricks, install the material in accordance with
the instructions of the supplier of the material.
Procedure
1.
Identify the positions where the inlet openings and the outlet openings, for the AirBox
inserts or the grates, must be put. See chapter
and refer to the preparation manual.
2.
Build the brickwork around the appliance up to the upper frame.
3.
If applicable, install a mantel iron.
a) Put ceramic felt on the top of the mantel iron. Brickwork can be built on top of
the ceramic felt.
4.
Build the fireplace around the appliance.
5.
Install the AirBox inserts or the grates, on the inlet openings and the outlet openings.
6.
Make sure the overpressure hatches are placed correct. Refer to chapter
instructions.
7.
Install the glass pane. See
a) Hidden Door
b) Hidden Door +
c)
Floating Frame
d) Floating Frame +
8.
Install the frame on the appliance. See chapter
Installation
Gas Fire Front 90-75
45
Summary of Contents for 90-75 PF2
